FLOW SENSORS

PRODUCT FEATURES

• Flow and consumption measurement in dry or wet air or high mass flow / velocity applications.
• Measurement at compressor outlet
• Tube diameters of 1’’ to 10” through center
• installation, bigger diameters through non-center installation.
• Insertion type, easy installation under pressure through ball valve possible or flexibility is required.
• High temperature applications up to 200°C.
• All parts which are in contact with flow medium.
• Are made of stainless steel.
• Compressor-FAD-Measurement.
• Steam mass flow and consumption measurement.

COMMON FEATURES FS 220

• Measures standard flow, mass flow, consumption and temperature.
• Thermal mass flow, indeipendent of pressure and temperature changes.
• P65 casing provides robust protection in rough industrial environment.
• Very fast response time.
• High accuracy and wide measuring range.
• Isolated mA and pulse output signals or Modbus/ RTU interface.
• Selectable gas type (some gases require real gas calibration).
• App for mobile phones and tablets for sensor setting via Bluetooth.
• Sensor can be calibrated in 2 different gases.
• Inline type where high accuracy is priority.
• Pipes sizes available: DN32, DN40, DN50, DN65, DN80.
• Process connections available: R thread, flange EN 1092-1, ANSI/B16.5.
• Exchangeable sensor unit (easy sensor swap).
• Integrated flow conditioner–> no straight inlet requirements.

at standard conditions in air. At other standard conditions and in other gas ranges are different and data are available on request. In larger pipe flow can also be measured.

TECHNICAL ADVANTAGES

• FPM seals.
• Stainless steel ball, valve is nickel plated brass.
• Slow ball valve rotation 90 degrees in 30 seconds (AS1) & 105 seconds (AS2) (designed to avoid water-hammer when opening or closing).
• Extended programming features relating to valve open and close cycles (100).