May 29, 2022 |
AIR SAVERS
AS1 & AS2
- A typical compressed air system has air loss through pipe work connections, leaking float type drains etc.
- The AIR-SAVER is a motorised ball valve that is installed in the compressed air line after the air receiver.
- The AIRSAVER opens and closes the air supply to the factory, based on customer specific working shifts.
- The AIR-SAVER will open the ball valve at the beginning of a working shift and close the ball valve when the working shift is over. From that point on, all compressed air will remain in the air receiver until the next working shift, rather than being lost through leakages.
- The clever and versatile programming feature allows for customer specific settings and is totally adaptable to the working hours of each individual factory.
- The AIR-SAVER can be installed in all pipe line systems up to 2”. Remote switching kits are available to operate the AIR-SAVER from a distance.
PRODUCT DIMENSIONS & SPECIFICATIONS
AS1
- Supply voltage : 230VAC or 115VAC 50/60 Hz
- Power consumption : 7W during cycle rotation
- Opening/Closing duration : 30 sec. /90°
- Max. medium temperature : 100°C
- Minimum pressure : 0 bar
- Maximum pressure : 16 bar
- Valve : 1” connection
- Manual override : Yes
- Remote controllable : Yes
- Environmental protection : IP54
- Timer display : 24 hours
- Programmable options : 16 cycles/day, 7 days/week
AS2
- Supply voltage : 230VAC or 115VAC 50/60 Hz
- Power consumption : 7W during cycle rotation
- Opening/Closing duration : 105 sec. /90°
- Max. medium temperature : 100°C
- Minimum pressure : 0 bar
- Maximum pressure : 16 bar
- Valve : 2” connection
- Manual override : Yes
- Remote controllable : Yes
- Environmental protection : IP54
- Timer display : 24 hours
- Programmable options : 16 cycles/day, 7 days/week